Incubation / Inactivation Water Baths
Water Baths for incubations and inactivations of cultures
Models 1002-1005/1008/1012/1013
Microprocessor controlled temperature regulation. Temperature display and setting digitally via LED display in 0.1°C increments. Temperature constancy ±0.1°C, temporal at 50°C.

Temperature range from approx. 5° C above ambient temperature to 99.9 °C (Models 1002 to 1008), from approx. 10 °C above ambient temperature to 99,9 °C (Models 1012 bis 1013), after installation of a water level regulator 1919 (accessory) from approx. 3 °C above tap water temperature to 99.9 °C.

Short heating-up times. Electronic overtemperature cut-out, 4°C above set temperature and electromechanical >130 °C. Electronic monitoring of the temperature regulator. In case of failure the cause of the fault is shown on the display. Soft touch keys with clear symbols. Interior (bath interior and heating element, cover frame, lid and perforated floor) made of stainless steel. Standard equipment includes lid and perforated floor*.
Tip-up, insulating lid with inner chamber, no dripping back of condensate into the vessels. Corrosion-resistant outer housing is made of electrolytically galvanized sheet steel, powder-coated. Drain cock at the back. The units are tested according to the German Equipment Safety Law and have the CE mark. Electrical connection: 230 V, 50/60 Hz (other voltages available on request).

Model 1005
Especially suitable for warming medical hot packs. *Water bath 1005 is supplied without perforated floor if the rack for hot packs 1923 (accessory) is ordered.

Models 1012 / 1013
The circulation system ensures an optimal temperature uniformity throughout the whole bath. An electric motor with rotary magnet is flanged to the bath floor. Its torque is transmitted to a PTFE coated stirring magnet in the bath. The stirring magnet forces the water into the centre of the bath and then evenly back again.

Type 1002
Capacity 7 Litres
External dimensions (W x D x H) 340 x 395 x 255 mm
Internal dimensions (W x D x H) 245 x 200 x 145 mm
Power 1000 W
Weight 9.0 kg