Peristaltic pump drives, MCP standard / MCP process
Can be combined with over 20 pumpheads for flow rates of 0.01 to 3700ml/min (depending on pump-head).
Combined peristaltic pump and precise dispenser. Microprocessor controlled, with precise controlled rotation speed and metering unit for 1 to 24 pump channels. The speed (1rpm to 240rpm) is adjustable to 0.1rpm, key-pad with LED-display, programmable. Different dosing modes supply very exact and reproducible results. With RS232 interface, tubing valve operation, dosing handle and foot switch. Can be used for sterile dosing up to 135°C (with adequate tubing). Dimensions (W x D x H): 155mm x 220mm x 260 mm (without pumphead).

Programmable functions:
-ml/min
-drive speed
-drop-free (roller reverse step)
-calibration ml/min in ml (volume)
-drive unit on/off

Dosing:
-volume ml
-volume/time unit
-dosing time (0.1 to 999 h)

Additonal functions MCP process:
-progammable sequences
-dust-tight and water-proof
Specifications MCP-Process
Motor type:
Speed: d.c. motor
1 to 240rpm
Speed setting: rpm, resolution 0.1rpm
Flow rate setting: ml/min, ml/min, l/min
Power consumption:
Power supply: 100W
100 to 230V, 50 to 60Hz a.c.
Protection rating: IP65
Weight: 6.9kg (without pumphead)
MCP-Standard
Motor type:
Speed: d.c. motor
1 to 240rpm
Speed setting: rpm, resolution 0.1rpm
Flow rate setting: ml/min, ml/min, l/min
Power consumption: 100W
Power supply: 230V 50Hz; 115V, 60Hz a.c. selectable
Protection rating: IP30
Weight: 6.4kg (without pumphead)

Type MCP-Standard