Mono / Double sklo Water Stills
Mono / Double Glass Water Stills, Type 2202 (Mono) , Output 2 L / hr., Water consumption 48 approx. L / hr., Power 1500 W, Voltage 230V 50/60 Hz, Weight 16 kg
Výrobce
Zařazeno v kategoriích
Destilační přístroje
Popis
Mono / Double Glass Water Stills
Mono Water Stills: models 2202, 2204, 2208 for 2, 4 and 8 litres / hr, Bi Distillation Stills: models 2302, 2304 for 2 and 4 litres /hr, fully automatic. Suitable for bench and wall mounting. Low-gas, bacteria- and pyrogen-free distillate, in conformity with DAB requirements and international pharmacopoeia regulations. Conductivity of mono-distillate approx. 2.2µs/cm at 25°C, conductivity of bi-distillate approx. 1.6µs/cm at 25°C. Minimal metal ion content in the distillate. Evaporators, condensers and overflows made of DURAN®/Borosilicate glass 3.3. Condensers with dribble guard. Quartz sleeved heating element. Condensers are kept sterile by steam. Water supplied through built-in solenoid valve with connection for ½ inch* (12.7mm i.d.) mains water pressure tubing, required water pressure >3 bar up to max. 7 bar. After the main switch is switched on, the solenoid valve opens to start the water supply. Cooling water outlet with ½ inch* (12.7mm i.d.) tubing connection . Water that has not been condensed flows out through the cooling water outlet*. Low energy consumption through distilling the heated cooling water. Distillate withdrawal at the right-hand side of the unit through tubing connection*. Electronic level control during the whole distillation process. Water level control in the condenser has automatic power cut-off in the event of water shortage. Electronic impurity detector starts automatic water change to rinse and clean the condenser. Degassing of carbon dioxide through vents on the condenser. Main and function switches as well as pilot lamps for monitoring are on the front of the unit. Housing made of electrolytically galvanized sheet steel, electrostatically powder-coated with epoxy resin. Visible distillation process through easily removable, unbreakable front screen that does not steam up. Power connection through connection cable (models 2202, 2204 and 2302 with German shock-proof type (Schuko) plug.
* Tubing for water inlet and outlet can be supplied as accessory items.
Technical Specification
Dimensions (W x D x H)
2202 / 2204:
2208 / 2302 / 2304:
650 x 200 x 390mm
650 x 365 x 390mm
Type 2202 (Mono)
Output 2 L / hr.
Water consumption 48 approx. L / hr.
Power 1500 W
Voltage 230V 50/60 Hz
Weight 16 kg
Mono Water Stills: models 2202, 2204, 2208 for 2, 4 and 8 litres / hr, Bi Distillation Stills: models 2302, 2304 for 2 and 4 litres /hr, fully automatic. Suitable for bench and wall mounting. Low-gas, bacteria- and pyrogen-free distillate, in conformity with DAB requirements and international pharmacopoeia regulations. Conductivity of mono-distillate approx. 2.2µs/cm at 25°C, conductivity of bi-distillate approx. 1.6µs/cm at 25°C. Minimal metal ion content in the distillate. Evaporators, condensers and overflows made of DURAN®/Borosilicate glass 3.3. Condensers with dribble guard. Quartz sleeved heating element. Condensers are kept sterile by steam. Water supplied through built-in solenoid valve with connection for ½ inch* (12.7mm i.d.) mains water pressure tubing, required water pressure >3 bar up to max. 7 bar. After the main switch is switched on, the solenoid valve opens to start the water supply. Cooling water outlet with ½ inch* (12.7mm i.d.) tubing connection . Water that has not been condensed flows out through the cooling water outlet*. Low energy consumption through distilling the heated cooling water. Distillate withdrawal at the right-hand side of the unit through tubing connection*. Electronic level control during the whole distillation process. Water level control in the condenser has automatic power cut-off in the event of water shortage. Electronic impurity detector starts automatic water change to rinse and clean the condenser. Degassing of carbon dioxide through vents on the condenser. Main and function switches as well as pilot lamps for monitoring are on the front of the unit. Housing made of electrolytically galvanized sheet steel, electrostatically powder-coated with epoxy resin. Visible distillation process through easily removable, unbreakable front screen that does not steam up. Power connection through connection cable (models 2202, 2204 and 2302 with German shock-proof type (Schuko) plug.
* Tubing for water inlet and outlet can be supplied as accessory items.
Technical Specification
Dimensions (W x D x H)
2202 / 2204:
2208 / 2302 / 2304:
650 x 200 x 390mm
650 x 365 x 390mm
Type 2202 (Mono)
Output 2 L / hr.
Water consumption 48 approx. L / hr.
Power 1500 W
Voltage 230V 50/60 Hz
Weight 16 kg
Varianty produktu
Pro zobrazení cen na míru se přihlašte do klientské sekce.
Kód produktu
Kód produktu
Kód BDL 9910674 Kód výrobce 2208


Kód BDL 9910676 Kód výrobce
2304
Type 2304 (Bi) , Output 4 L / hr., Water consumption 144 approx. L / hr., Power 5800 W, Voltage 400V* 50/60 Hz, Weight 24 kg
2304


Kód BDL 9910673 Kód výrobce
2204
Type 2204 (Mono) , Output 4 L / hr., Water consumption 96 approx. L / hr., Power 3000 W, Voltage 230V 50/60 Hz, Weight 17 kg
2204


Kód BDL 9910675 Kód výrobce
2302
Type 2302 (Bi) , Output 2 L / hr., Water consumption 96 approx. L / hr., Power 2900 W, Voltage 230V 50/60 Hz, Weight 24 kg
2302


Kód BDL 9910672 Kód výrobce
2202
Type 2202 (Mono) , Output 2 L / hr., Water consumption 48 approx. L / hr., Power 1500 W, Voltage 230V 50/60 Hz, Weight 16 kg
2202


Máte otázky? Kontaktujte nás
Poslat